Hot Rolled – Rounds
Finish: Black as rolled
Size Range
Metric – 25mm to 105mm
Imperial – 1″ to 4⅛”
Availability/non-standard sizes
- The above range is normally available on a rolling cycle of 10 to 12 weeks
- Please note sizes below 75mm (3″) are considered non-standard and are available by special arrangement, please enquire.
Dimensional tolerances
Tolerances to typical national standards can be supplied as plus and minus, all plus, or all minus. Tight tolerances can be considered.
Straightness tolerances
Tolerances to typical national standards are available. ‘Extra-straight’ options are available.
Lengths
Bars are only available in lengths, not in coils. Maximum length typically 12,000mm (39′ 0″)
Bar ends
Typically cold sheared, but large sizes may be cut with an abrasive disc. Cold sawn ends are also available
Typical steel types
Carbon, Freecutting, Semi-Freecutting, Leaded Freecutting, Low Alloy, Boron.
Supply condition
Unless specified otherwise, the supply condition is ‘as rolled’. Bars can also be supplied hardened & tempered, annealed, normalised and stress relieved.
De-scaling
Bars can be supplied de-scaled by way of shot-blasting and supplied dry or lightly oiled.
Minimum order quantity
a. From standard billet stock. Order quantities below 10 tonnes will incur a small-quantity price extra. Where smaller quantities are offered, they will never be less than 3 tonnes.
b. From specially purchased billets. On every occasion, order conditional on receipt of a written undertaking to consume specially purchased billets in an agreed timescale.
