Hot Rolled – Squares
Finish: Black as rolled
Metric – 22mm to 132mm
Imperial – 7/8″ to 5″
Non-standard sizes are our speciality, please enquire.
• Every 5/6 Weeks – 50mm to 103mm Sq (2″ to 4 1/8″ Sq)
• Every 10/12 Weeks – 36.5mm to 47.5mm Sq (1 7/16″ to 1 7/8″ Sq)
(Subject to Tonnage Build Up)
• Every 6 Months – All others not listed above
(Subject to Tonnage Build Up) or by Special Arrangement
Corners are typically supplied sharp but can be supplied with a corner radius, please enquire.
Tolerances to typical national standards can be supplied as plus and minus, all plus, or all minus. Tight tolerances can be considered.
Tolerances to typical national standards are available. ‘Extra-straight’ options are available.
Bars are only available in lengths, not in coils. Maximum length typically 12,000mm (39′ 0″)
Typically cold sheared, but large sizes may be cut with an abrasive disc. Cold sawn ends are also available
Typical steel types
Carbon, Freecutting, Semi-Freecutting, Leaded Freecutting, Low Alloy, Boron.
Unless specified otherwise, the supply condition is ‘as rolled’. Bars can also be supplied hardened & tempered, annealed, normalised and stress relieved.
Bars can be supplied de-scaled by way of shot-blasting and supplied dry or lightly oiled.
Minimum order quantity
a. From standard billet stock. Order quantities below 10 tonnes will incur a small-quantity price extra. Where smaller quantities are offered, they will never be less than 3 tonnes.
b. From specially purchased billets. On every occasion, order conditional on receipt of a written undertaking to consume specially purchased billets in an agreed timescale.
c. For Special Profiles and non standard sizes is by agreement.